Lighting control.

Your key to optimal lighting, maximum comfort and noticeable cost savings.

SITECO Connect for indoor areas opens up the full potential of your lighting system. Sensor-based control saves energy and extends luminaire service life through targeted dimming. On the other hand, the needs-based increase in illuminance creates more visibility and safety, if necessary. Lighting management systems automate control, create transparency and thereby optimize operations – so you can focus on what really matters.

Go to product catalogue

Energy Performance of Buildings Directive (EPBD). Easily realised with SITECO.

The best time to invest in intelligent lighting control is now!

The new EU directive 2024/1275 of the European Parliament and of the Council for the overall energy efficiency of buildings across all trades, which also includes lighting is to be implemented by the Member States within 2 years in national building legislation. With SITECO, you are well prepared for the future and can easily fulfil the EPBD requirements.

Find out more about the law and your implementation options here

Ban on fluorescent lamps: refurbish now and profit now.

The ban on fluorescent lamps makes refurbishment necessary. Replacing fluorescent lamps with LED luminaires can save a lot of energy – and even more with lighting control. Whether new buildings or old existing buildings without existing infrastructure – with the SITECO Connect modular system, upgrades are anything but expensive and time-consuming.

Find out more about our refurbishment solutions

SITECO energy-saving check. Reach sustainability goals and reduce energy costs now.

In view of the constant increase in costs, saving energy has never been as worthwhile as it is today. By refurbishing your lighting system, you can optimise your energy consumption and significantly reduce your CO2 emissions. You can save up to 80 per cent of your energy costs immediately – an investment that quickly pays for itself.
How much money and CO2 can you save?

Find out with the SITECO energy-saving check.

This is how you benefit from smart lighting control.

Maximum energy and cost savings.

Light only when and where and to the extent that it is actually needed.

State-of-the-art light and motion sensors help you maximise your energy, CO2 and cost savings.

Learn more

Overview of savings potential by utilisation

Savings potential based on sensors and hours of use according to DIN V 18599-10 (excerpt)
Usage	Annual useful life	Savings by presence detection	Savings by daylight control / constant light control
Individual and group office	2,750 h	28,50 %	40 %
Classroom, group room (kindergarten)	1,400 h	23,75 %	40 %
Toilets and washrooms in non-residential buildings	2,750 h	85,50 %	0 %
Secondary areas without recreational rooms	2,750 h	85,50 %	0 %
Data centre	8,760 h	47,50 %	0 %
Commercial and industrial halls	2,070 h	9,50 %	20 %
Gym without audience area	3,750 h	28,50 %	30 %
Car parks (public use)	5,475 h	76 %	0 %
Storage halls, logistics halls	8,760 h	57 %	0 %
For other types of use, please refer to DIN V 18599-10

Motion sensors ensure that the light is only switched on when someone is actually in the room. If no more movement is detected, it switches off automatically after a certain time. This significantly reduces energy consumption, especially in rarely frequented rooms such as corridors, warehouses or sanitary areas.

Artificial lighting is automatically adapted to the available daylight. Sensors continuously measure the incident light and regulate the illuminance accordingly so that optimum lighting conditions always prevail.

This saves energy, the light remains natural and pleasant, and user comfort increases - without any manual readjustment.

Amortisation in record time.

Intelligent lighting control pays for itself faster than ever before.
Those who decide against intelligent lighting control today are leaving significant energy-saving potential untapped. There has never been a better time to reap the benefits of smart lighting control than right now.

Refurbishment in no time - faster, smarter, wireless.

Integrating intelligent lighting control into refurbishment projects is too complex, costly or time-consuming? With wireless control concepts such as SITECO Connect 11H Wireless, your system is ready for the future in no time at all.

Without any rewiring. No interruptions to your operating processes. Ready for use immediately.

Minimal downtime. For your operating safety.

Easy maintenance. Without unnecessary loss of time and expense.

Reprogramming at the push of a button: intelligent lighting control makes replacing sensors and luminaires a breeze.

And therefore especially fast and cost-effective.

Minimal effort for maintenance.
With remote monitoring.

Remote monitoring significantly reduces maintenance costs and enables targeted and cost-optimised measures without the need for on-site visits. Possible failures are detected and prevented early on, avoiding major disruptions. Simple remote adjustments, such as changing delay times or lighting groups, can sustainably increase the efficiency of your lighting systems.

Full transparency.
With monitoring and analytics.

Analysis tools provide absolute transparency. They monitor the condition of your system, provide valuable insights into how the building is used and enable evaluations to further optimise energy efficiency, maintenance costs and operating procedures.

Emergency lighting.
Always in view. Automatically documented.

Say goodbye to manual testing of your emergency lighting.

With SITECO Connect, you always have an overview of your emergency lighting and also save valuable time. The system automatically monitors your emergency lighting with regular tests at specified intervals. You immediately receive all information about the status of your system – if you wish, this can also be easily and conveniently documented in a test logbook.

With open standards, you remain flexible and prepared for the future.

Today a production hall, tomorrow a shelf warehouse. With SITECO Connect, you remain completely flexible and can easily adjust lighting groups, lighting conditions and functions as needed.

Don't want to be tied to one manufacturer when it comes to lighting control?

We understand that. Because if you want to expand or upgrade in the future, you're better off with an open system. SITECO Connect Indoor offers open standards that guarantee sustainability, flexibility and security.

Experience light with a feel-good factor and ease of use.

More productive and healthier employees. With HCL^live.

Intelligent light can do more. With the appropriate colour temperature, illuminance and light dynamics, well-being and performance can be significantly increased. Technology forms the basis. Planning, configuration, installation and calibration are perfectly matched to the individual conditions. With SITECO HCL^live, you can create the ideal atmosphere for productivity.

Learn more

Auto swarm function. For more comfort and safety.

Intelligent sensors switch on the light predictively and precisely where it is actually needed. Neighbouring areas are dimmed down to a basic level of illumination, thus creating a pleasant atmosphere.

Easy to use.

Lighting control doesn't have to be complicated. Whether using classic light switches or flexible, intuitive touch panels, our light management system adapts to your requirements while remaining easy to use.

Our portfolio.

Modular. The right solution for every application.

Please click the red circles for more information!

SITECO lighting solutions are based on a modular system. All luminaires and sensor luminaires have standardised interfaces, which means that they can be optionally expanded with sensor modules. This results in intelligent luminaires that can be easily integrated into light and building management systems. With a few components and quick planning, complex requirements are efficiently met.